University of Aberdeen, UK

University of Benin, Nigeria

Head of Engineering & Projects at Rensource Energy

Lagos, Nigeria

Delivered a 700kWp PV-GEN hybrid commercial & industrial solar solution to one of the largest egg producers in Nigeria  	Review and oversee ongoing projects	Review respective project schedules with various project managers	Review & approve design documentation and drawings	Follow up with our technical partners and vendors ensuring products and services are to our specifications	Review and guide site construction activities, follow up with lead site engineers	Provide mentorship to junior engineers	Update management on various project's technical progress	Carry out site inspections and review project progress

Rensource Energy

Head of Engineering & Projects

- Provide technical direction for the design, development and systems integration for client engagement from definition phase through implementation.■	Apply significant knowledge of industry trends and developments to improve service to our clients.■	Communicate effectively with teams and clients.■	Interface with the marketing and strategy department, provide updates on current solutions being researched/ undergoing field trials.■	Review work carried out by various teams (R&D, Software development and Implementation team).■	Recognize system deficiencies and implement effective solutions such as work process flows.■	Attend to technical issues arising from the deployment and installation team.■	Develop custom solutions for our potential customers via R&D.■	Mentor young engineers, provide direction and scope, match project tasks with opportunities for development so that employee potential is utilized to the maximum.■	Delegate and allocate responsibilities efficiently to manage projects end to end.■	Ensure technical teams are contributing and updating our processes and procedures.■	Encourage team interaction, boost employee motivation and appreciate team contribution, ■	Guide the R&D team in selection of instruments; level gauges (capacitance probes), ultrasonic radar gauges, RTU’s (Remote Terminal Units, and general M2M devices.■	Calibrating devices, creating calibration chats and testing all instruments, integrating instruments onto the web based platform before deployment of solutions for the clients.■	Review all engineering documents, review test procedures, test reports, progress reports and create necessary reports to management.

Concept Nova

Technical Manager

- Attended client meetings with project team members and assist with the determination of project requirements.■	Assisted the Project Manager in the drafting and issuance of project proposals.■	Tracked the progress and quality of work being performed by 3rd party contractors.■	Effectively and accurately communicate relevant project information to the client and project team.■	Prepared daily progress reports which were sent to the clients daily.■	Kept the Project Manager  and others informed about project status and issues that may impact client relations.■	Met with client representatives on site and interfaced with discipline leads.■	Ensured clients’ needs were met in a timely and cost-effective manner.■	Reviewed documents pertaining to the electrical works, created work packages, reviewed timelines and schedules with the Project Manager.■	Created MTO’s and product specifications for purchased (electrical works).■	Designed the helipad FATO & TLOF perimeter lighting installation procedure and associated helipad equipment embedded in the concrete helipad. ■	Assigned tasks and supervised electrical technicians carrying out all electrical works.■	Followed up on the works being done at the fabrication yard.

SJV Global Systems ltd

Project Coordinator / Lead Electrical Engineer

OVADE OGHAREFE FLOW STATION UPGRADE PROJECT■ Acted as the support Engineer to Project Manager. Assisted in developing, implementing and managing the upgrade construction  operations of clients $6M  Flow Station facility contract.■ Carried out the facility verification in relations to Electrical and instrumentation works before the commencement of the project.■ Supervised mechanical fabrication relating to Electrical & Instrumentation works, ensuring fabrication was done according to design specifications.■ Reviewed documents and drawings with the Mechanical and Civil leads ensuring compliance with project and design specifications.■ Followed up with clients and technical partners on requisitions, long lead time items, and other miscellaneous matters to keep up with the project schedule.■ Installed 3 Nos of PLC panels in the control room (PCS, ESD & F&G hazard watch.■ Planned the Electrical and Instrumentation construction week to week, such as:■ Laid the earthing ground grid around the facility, installing earth rods and bonded it to all steel structure and skids.■  Supervised the  fabrication and installation of all cable trays, pulling of all instrument cables and power cables.■  Planed and carried out the installation of all instrument and Fire & Gas junction boxes in the field, oversaw the  installation of process measuring instruments (pressure transmitters, flow transmitters, temperature indicators, pressure indicators, anubars, level gauges, level indicators, level switches etc) on fabricated supports.■ Installed   Fire & Gas detection devices (thermal detectors & LEL detectors) overlooking the process facility.■ Planed the routing and laying of instrument tubings and impulse lines.■ Re-designed cable route and re-laid all power cables between 6 numbers of generators and the MCC.■ Met with client supervisors daily on site.■ Oversaw 3rd party contractors, such as System Integrators and the pre-commissioning team.

OBAX Worldwide Ltd.

E&I /Assistant Project Engineer

FLARE RELOCATION, OVADE OGHAREFE FLOW STATION / GAS PLANT PROJECT■	Supervised a team of 8 members from the installation to the commissioning of the smokeless flare system.■	Planned and coordinated the installation of flare ignition junction boxes, thermocouple cables and sizing and installation all power cables. ■	Interfaced with the mechanical department to ensure all the piping for the fuel gas was correctly installed.■	Ensured all the necessary cables were connected and terminated correctly as per design.■	Performed the commission with equipment vendor representative.

E&I Engineer

Construction of  2Nos 20,000bbl OIL STORAGE TANK PROJECT (OREDO FLOW STATION, NPDC)■	Installed 2 level switch (LSH & LSL) and a magnetic level gauge with transmitters attached to both oil storage tanks.■	Installed 4Nos of UV/ IR detectors (flame detectors) around the crude oil storage tanks.■	Installed an instrument junction box (IJB) outside the bund wall and routed all instrument cables from field devices to terminate inside.■	Multicore instrument cables were pulled, laid and terminated between IJB and NPDC control room.■	4Nos perimeter lighting posts, wired and terminated at the designated power junction box.■	A lightning arrestor was installed on one of the perimeter lighting poles and connected to the earth ground grid.■    I interfaced with the mechanical department to fabricate all necessary supports for field devices.■	I reviewed all necessary documentation and passed them on to the client via the DCC.

OBAX PPS OREDO FIELD ALLIANCE

OVADE OGHAREFE GAS PLANT PROJECT – PHASE II ■	Planned, organized, implemented, and coordinated the all Electrical and Instrumentation aspect of the $160 million project.■	Managed staffing and direct supervision of all technical and support personnel. Led a team of 15 between the main & field offices.■	Managed & interfaced with various disciplines (Civil, Mechanical, Electrical etc.) involved in the project life-cycle.  ■	Maintained overall project schedule, fast-tracked project tasks to meet client target completion date. ■	Defined and developed engineering/ construction work scopes, justification basis, and engineering surveillance plan. ■	Sourced and selected subcontractors, developed technical contract documents, effectively minimized change orders and project slippage.■	Reviewed project documents, inspected construction progress and issued status report to the Project Manager.■	Oversaw project team building/progress meetings and ensured all team leads were aware of respective deliverables and were executed accordingly.■	Prepared weekly progress reports on key weekly deliverables to management and client, to measure performance against project timelines, scope, and budget.■	Supervised electrical fabrication, ensuring fabrication was done according to design specifications.■	Met with client supervisors daily on site.

Lead Electrical & Instrumentation Construction Engineer

OPERATIONS & MAINTENANCE (OREDO EARLY PRODUCTION FACILITY)■	Was part of the team who carried out the maintenance of the production facilities. Maintained various Level switches, gauges, back pressure controller, pumps and all process equipment etc. ■	Commissioned and decommissioned pumps. Changed seal rings and shaft in pumps. ■	Planned and executed maintenance schedule which involved taking daily pressure readings on all vessels. Issued out work orders for maintenance activities.■	Maintained preventative maintenance logs on all vessels, equipment and systems.■	Developed a parts replacement file system containing all components of all equipment that were in use with all necessary data for critical parts and an instant record of sources for effective ordering. ■	Analyzed well performance from daily computation of readings from test separator.

Facilities Engineer

COMPUTERIZING THE PORT- HARCOURT STATE LIBRARY■	Designed and set up an e-book library server, installed and networked (wired and wireless) all newly acquired and existing computer systems to the e-book server; set up print servers.■	Redesigned the electrical wiring for parts of the library building to cater for the extra number of computers added, and supervised the electrical technicians in the wiring, and the installations of the necessary protective circuitry.■	Trained and created training manuals for super users and users of the library on the newly installed computer facilities.■	Ensured Project timelines were met within the planned project cost and quality.

Urmni Nig Ltd

IT Engineer/ Project Manager

- I was part of the consultancy team to oversee the electrical and mechanical aspect of INEC’s permanent sites in four states of the federation.■      Acquired understanding of piping and instrumentation diagrams (P&ID’s) and instrumentation measuring devices.■	I made use of AutoCAD and Excel applications.

Cociu Consult Ltd (Oil and Gas / Engineering Consultancy Firm

Trainee Engineer

- Installed & configured networks  for small/ medium offices.■	Installed Infrastructure for Internet sharing and performed  network maintenance/troubleshooting for numerous clients..■	Computer assembly, software installation, troubleshooting and maintenance.

Cem® Dennis Patrick Ogbeide

Cem® Dennis Patrick Ogbeide